Diving with Zuelch
Dipping is one of the most efficient processes, as there is practically no paint loss (e.g. due to overspray during spraying). Wood, metal or plastic can be easily processed with dip coatings.
Hand dipping method
is a simple method for low-viscosity coatings, such as metal primers, wood impregnations, etc. This method can also be used quickly and inexpensively for more complex part shapes.
Machine immersion process
For high-quality surfaces, the machine dipping process with mechanical or electronic speed control is used. We will be happy to name equipment manufacturers on request.
Quality and thickness of the coating
is determined by the following parameters:
- Special coatings (run-off behavior, drying, etc.)
- Part shape
- Pull-out speed
- Number of coating layers
Depending on the quality requirement, dipping once or several times is necessary. Prerequisite: The part mold must be suitable for the dipping process. We will be happy to advise you.